The Mighty Charger is the official Storz & Bickel power adapter that gets your Mighty or Mighty+ vaporiser battery from empty to full without faff. Plug it straight into the bottom of the unit, wait a bit, and you're back in business. No proprietary dock, no cable gymnastics — just the replacement charger that ships with the device from the factory in Tuttlingen.
Why you'd want a spare Mighty charger
Chargers get lost. They get left at a mate's house, packed in the wrong suitcase, chewed by the dog, or the cable finally gives up after three years of being yanked out of the socket. The Mighty uses a proprietary power adapter — it's not a standard USB-C brick you can borrow off your phone charger — so when it goes missing, the vape goes dark until a replacement arrives.
This is that replacement. It's the exact same adapter Storz & Bickel ship with a new Mighty or Mighty+, bought on its own. Keep one at home, one in the travel kit, and you'll never find yourself staring at a dead vape before a session.
Which Mighty does it fit?
This adapter works with the original Mighty and the newer Mighty+ (Mighty Plus). Both models use the same direct-plug charging port on the base of the unit — you don't need an intermediate cable, you plug the adapter straight in.
| Device | Compatible |
|---|---|
| Mighty (original) | Yes |
| Mighty+ / Mighty Plus | Yes |
| Mighty Medic | Yes (standard charging; pass-through use during operation requires the +15V @ 3A Supercharger) |
| Crafty / Crafty+ | No — different charging system |
| Volcano | No |
Specifications
| Brand | Storz & Bickel |
| Type | Power adapter / charger |
| Connection | Direct plug into Mighty base |
| Compatibility | Mighty, Mighty+ |
| Plug | EU two-pin |
| Made in | Germany |
| SKU | VS0336 |
Pairs well with the Mighty Cooling Unit (the mouthpiece assembly that sees the most wear and tear) and the Mighty Normal Screen Set if yours are getting gunky. If you vape out and about a lot, the Storz & Bickel Car Adapter is worth a look too — same job as this one, but runs off a 12V socket.
How to use it
- Take the adapter out of the packaging — there's one piece, no assembly.
- Plug the barrel connector into the charging port on the bottom of your Mighty or Mighty+.
- Plug the adapter into a mains socket.
- The orange LED on the Mighty lights up while charging. Full charge from empty takes roughly 80 minutes on the original Mighty; the Mighty+ is considerably faster thanks to the upgraded internals.
- Once the LED goes out, unplug and you're ready to vape.
From our counter
Honest note: this is a straight replacement part, not an upgrade. It doesn't charge faster than the one that came in the box — it's the same adapter. If you want quicker top-ups or pass-through power while using a Mighty+ Medic, you want the Storz & Bickel Supercharger instead (+15V @ 3A, sold separately). For everyone else, this is the one you need when the original goes walkabout.
The one thing worth flagging: the cable is a fixed length. You can't swap it for a longer one, so if your socket is far from where you like to vape, plan accordingly or grab an extension lead.
Frequently Asked Questions
Is this the same charger that comes with a new Mighty?
Yes. It's the official Storz & Bickel power adapter, identical to the one shipped in the box with a new Mighty or Mighty+. Same specs, same plug, same cable length.
Can I charge my Mighty with a USB-C cable instead?
No. The Mighty uses a proprietary charging port, not USB-C. Even the newer Mighty+ keeps the same direct-plug adapter system rather than switching to USB-C. You need this specific Storz & Bickel adapter.
How long does it take to charge the Mighty fully?
Roughly 80 minutes from empty on the original Mighty. The Mighty+ charges faster — Storz & Bickel list around 40 minutes to full thanks to the upgraded battery electronics.
Can I vape while it's plugged in?
On the original Mighty, no — it needs to finish charging first. On the Mighty+ there is pass-through functionality, but using it during charging with heavy draw works best with the higher-output Supercharger (+15V @ 3A) rather than this standard adapter.
My Mighty won't hold a charge anymore — will a new adapter fix it?
Probably not. If the device charges but the battery drains quickly, that's a battery issue, not an adapter issue — and the Mighty battery isn't user-replaceable, so it's a Storz & Bickel service job. A new adapter only helps if the old one is physically damaged or lost.
Does it work across the EU?
Yes. It's a standard EU two-pin plug and runs on 100–240V mains, so it works in any EU country and in the UK with a simple plug adapter.
Last updated: April 2026
